Synergistic Research

Synergistic Research cables are developed through objective measurements, advanced active technologies and proprietary cable geometries. We voice each of our cables through a series of subjective listening tests to select material combinations that will enable each cable design to reproduce music that is as close to live as possible.

First we engineer specific cable geometries to match your system. For example, in our Phase I and Phase II interconnect families we’ve developed two different cable geometries. Kaleidoscopes are engineered for long runs, balanced terminations and as warmer sounding cables for solid state electronics. Looking Glass interconnects are engineered for vacuum tube electronics and to gain higher resolution from solid state electronics.

After arriving at a geometry for a given set of components, the second and equally important phase of our cable development process is voicing each cable to complement its target components. This is by far the most time consuming process as it involves the hand fabrication of dozens of variations of each geometry. Countless hours are spent listening for just the right combination of materials that will recreate the magic of live music.

During the voicing process we submit our cables for beta testing to an independent panel of careful listeners. Since our beta testers are not internally involved with our development process, we keep our observations objective. Finally, all those involved in voicing our cables regularly attend live orchestral performances in order to provide a reference point from which to gauge the ultimate success of our cables.

Portfolio

SRX Power Cable

The technology for our new SRX power cord comes direct from our SR25 25th Anniversary power cord that was limited to 100 pieces worldwide. The SRX is an exact duplicate of the now sold-out SR25 with one exception, we are using a different grade of pure six-nines silver, and this cuts the cost of our reference power cord in half. Each SRX power cord is fabricated by hand in our California factory including a flexible pure silver signal path ribbon laminate that acts as an Electromagnetic Cell running the full length of the cable from the wall plug to the IEC. Additional AC conductors are made from pure six-nines silver in an Air Dielectric for a total of nine gauge of pure silver each for the hot and neutral run. In every respect, the SRX represents the zenith of what we currently know on building the world’s state-of-the-art power cord. SR technologies include the most advanced UEF shielding we have ever developed for a power cord and the most complex duel folded electromagnetic cells we have placed in a power cord made from pure six nines silver for both the hot and neutral AC leg. With a long flexible flat EM Cell and two folded EM Cells all made from pure six-nines silver, you have in effect a pure silver PowerCell line conditioner in an AC cable format.

Galileo SX represents the pinnacle of what we currently know in the field of building audio cables for high-resolution audio systems. We start with complex hand built geometries with Air, Teflon, and Silk dielectrics, pure 99.9999% monofilament silver conductors, 4th generation Tricon geometries, custom designed silver connectors that reduce the amount of material to only what is needed for maximum signal transfer, star point grounding for digital and analogue interconnects that reduces series inductance and noise, new redesigned UEF Tuning Circuits that deliver higher levels of resolution and musicality, and totally new technologies like Matrix UEF Shielding for a lower system noise floor with unparalleled low frequency impact and overall musicality, and a proprietary 1,000,000 volt conditioning process that permanently alters how signal travels through a conductor for more efficient signal transfer as well as a second conditioning process first developed for our Blue Fuses that dramatically improves musicality for ultra resolution without listening fatigue. And we apply the same UEF Compound first developed for our SR Blue fuses to various components of each cable’s design for the best interconnects, speaker cables and power cords we have ever hand build in our California factory.

Atmosphere X Series Cables

Atmosphere X Series Interconnects

Atmosphere X Series Interconnects

Atmosphere X Series Speaker Cables

Atmosphere X Series Speaker Cables

Atmosphere X Series Power Cables

Atmosphere X Series Power Cables

Atmosphere X Series Digital Inteconnects

Atmosphere X Series Digital Inteconnects

Atmosphere Series Headphone Cables

Atmosphere Series Headphone Cables

Atmosphere Series Subwoofer Cables

Atmosphere Series Subwoofer Cables

FOUNDATION Cables

Build your system on a solid foundation

Foundation Interconnect

Our new Foundation Interconnects and Speaker Cables are the brainchildren of our Lead Designer who wanted an affordable IC and SC loom with the performance for which other companies charge thousands of dollars. To make this a reality, Ted distilled his highest performance cable technologies like pure six nines silver in a handmade Air String geometry with UEF Matrix Shielding taken directly from our Atmosphere X Series cables and a full Blue Fuse treatment to make these cables punch far above their weight class. When paired with our UEF Blue or Black AC Power Cords, you have an affordable loom with sonic performance enough for even six-figure stereo systems.

Available in Black and White

4 each RCA, 6 each XLR Silver Air String:

  • Silver Air Strings: 99.9999% pure monocrystal silver conductor
  • 4 separate conductors RCA / 8 separate conductors XLR
  • Dielectric: Air (sealed)
  • Shielding: Silver Braid -Quantum Tunneled

RCA and XLR Connectors:

  • Silver Teflon SR 20 RCA or Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

Build Notes:

  • 8 (RCA) 12 (XLR) point-to-point hand soldered connections
  • Atmosphere Level 2 UEF Matrix Shielding: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Silver Solder: 4%
  • Hand build time: 2 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

 

 

Foundation Speaker

If you are like many audiophiles, perhaps you’ve never experienced a full loom of cables designed to work together because you felt they would be too expensive? Or perhaps you think your current cable mix match is synergistic in your system? If so, now is the time to audition a full loom of Foundation cables with UEF Blue or Black power cords from Synergistic Research, and you’ll discover just what your system is truly capable of. We are so confident these are the best sounding cables in the world at their price points, we’re offering them through participating SR dealers and distributors with a full 30-day money back guarantee. With Foundation cables, you can take your time and discover what the Synergistic Research house sound is all about. Foundation Series cables also blend perfectly with all current SR Series cables including Atmosphere X and Galileo SX so you can mix and match while staying true to the SR house sound of detail, air, soundstaging and dynamics with an ultra-low noise floor. Foundation cables are also a solid foundation when employing other SR products that create synergy in acoustics, AC and Ground Filtration, and Component Isolation.

4 each Silver Air String:

  • Silver Air Strings: 99.9999% pure monocrystal silver conductor
  • 8 separate conductors
  • Dielectric: Air (sealed)
  • Shielding: Silver Braid -Quantum Tunneled 

4 each High Current Copper Air String:

  • Copper Air Strings: 99.95% pure copper conductor
  • 8 separate conductors 
  • Dielectric: Air (sealed)
  • Shielding: Silver Braid -Quantum Tunneled

SR BoFa Banana and SR Silver Spade Connectors

Build Notes:

  • 16 point-to-point hand soldered connections
  • Level 2 UEF Matrix Shielding: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Silver Solder: 4%
  • Hand build time: 2 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

CORE UEF Cables

Meet the new standard

CORE UEF Level 1

Level 1 Interconnect Terminations:

  • 6 each High Purity Silver Matrix conductors
  • Dielectric: Expanded Polyethylene Foam, Polyethylene
  • Shielding: Silver/Copper Braid
  • High Purity Silver RCA with Gold plated Center Pin
  • UEF Technology Standard Level 1 – UEF coating with Graphene is applied to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. 

CORE UEF Level 2

Level 2 Interconnect Terminations:

  • 6 each High Purity Silver Matrix conductors
  • Dielectric: Expanded Polyethylene Foam
  • Shielding: Silver/Copper Braid
  • High Purity Silver RCA with Gold plated Center Pin
  • UEF Technology Standard Level 2 -UEF coating with Graphene is applied to connectors and cabling significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors also benefit from dampening effect that UEF provides.

CORE UEF Level 1 SC

Level 1 Speaker Cable Terminations:

  • 4 each High Purity Silver/Copper Matrix conductors
  • Dielectric: Modified Polyethylene
  • Shielding: Silver Mylar
  • High Purity Silver and Gold plated spades and BoFa bananas
  • UEF Technology Standard Level 1 – UEF coating with Graphene is applied to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. 

Level 1 Speaker Cable Build Notes:

  • 8  point-to-point hand soldered connections
  • Silver Solder 4%
  • Hand build time: 1.5 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • Listened for signal direction before build
  • Handmade in our California factory

CORE UEF Level 2 SC

Level 2 Speaker Cable Terminations:

  • Level 1 Speaker Cable Terminations: UEF Graphene
  • Dielectric: Modified Polyethylene
  • Shielding: Silver Mylar 
  • High Purity Silver and Gold plated spades and BoFa bananas
  • UEF Technology Level 1 – UEF Graphene is applied at the termination points for improved signal transfer
  • 6 each High Purity Silver/Copper Matrix conductors

Level 2 Speaker Cable Build Notes:

  • 8 point-to-point hand soldered connections
  • UEF – 1 termination (proprietary)
  • Silver Solder 4%
  • Hand build time: 1.5 hours
  • Quantum Tunneling: Connections and cabling are treated with 1 million volts of electricity at specific frequencies and pulse modulations for improved signal transfer
  • Listened tests are performed to determine correct conductor orientation before build
  • Handmade in our California factory

CORE UEF Jumper IFT

A Better Way to Bi-Wire

IFT Bi-Wire vs. Jumper Cables

So how is IFT Bi-Wire termination different from standard jumper cables or binding straps? Simple: Jumper cables are rarely tuned to the frequency range they are intended to transfer, and are often times of a much lower quality than the speaker cables they are used with. Furthermore, jumper cables introduce additional hardware, in the form of spade lugs or banana plugs, that further degrade the sound. Bi-wire binding straps are almost always worse then jumper cables, as they are little more than plated metal of a quality and build that introduces considerable distortion in the form of harsh highs or muddy low frequencies.

UEF Red Power Cable

3 each 12 awg. SR Copper:

  • Dielectric: (EPDM) Ethylene Propylene 
  • Connector Input US: 1 each Synergistic Research C07 Pure Copper
  • Connector Input Int’l:1 each Synergistic Research C07 Pure Copper Schuko 
  • Connector Output US: Synergistic Research C07 Pure Copper IEC 15 amp  
  • Connector Output Int’l: Synergistic Research C07 Pure Copper IEC 15 amp  

Build Notes:

  • UEF: UEF Coating with Graphene is applied to connection points, wall plug and IEC
  • Quantum Tunneling: 1 million volts are passed through the finished cable to dramatically improve electrical propagation 
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

Voltage and current Rating:

  • US: 20amp/125v
  • (EU/AU/UK): 16amp/250v

UEF Black Power Cable

3 each 12 awg. SR Copper:

  • Dielectric: (EPDM) Ethylene Propylene
  • Connector Input US: 1 each Synergistic Research C07 Pure Copper
  • Connector Input Int’l: 1 each Synergistic Research C07 Pure Copper
  • Connector Output US: Synergistic Research C07 Pure Copper IEC 15 amp
  • Connector Output Int’l: Synergistic Research C07 Pure Copper IEC 15 amp

Build Notes:

  • UEF Level 2 – UEF coating with Graphene is applied to conductors, connectors and shield to reduce noise and improve wave propagation
  • Quantum Tunneling: Post Production process, 1 million volts are passed through the finished cable to improve conductor function
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

Voltage and current Rating:

  • US: 20amp/125v
  • (EU/AU/UK): 16amp/250v

UEF Black High Current Power C.

3 each 10 awg. SR Copper:

  • Dielectric: (EPDM) Ethylene Propylene
  • Connector Input US: 1 each Synergistic Research C07 Pure Copper
  • Connector Input Int’l:1 each Synergistic Research C07 Pure Copper
  • Connector Output US: Synergistic Research C07 Pure Copper IEC 15 amp and 20 amp connectors
  • Connector Output Int’l:Synergistic Research C07 Pure Copper IEC 15 amp and 20 amp connectors

Build Notes:

  • UEF: UEF Technology Standard Level 2 – UEF coating with Graphene is applied to connectors, cabling and shield to significantly reduce noise and improve wave propagation
  • Quantum Tunneling: Quantum Tunneling: Connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations to improve cable function 
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

Voltage and current Rating:

  • US: 30amp/125v
  • (EU/AU/UK): 20amp/250v

UEF Blue Power Cable

3 each 12 awg. SR Copper:

  • Dielectric: (EPDM) Ethylene Propylene
  • Connector Input US: 1 each Synergistic Research C07 Pure Copper
  • Connector Input Int’l: 1 each Synergistic Research C07 Pure Copper
  • Connector Output US: Synergistic Research G07 Gold IEC 15 amp
  • Connector Output Int’l: Synergistic Research G07 Gold IEC 15 amp

Build Notes:

  • Atmosphere Level 2 UEF Matrix Shielding: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Silver Solder: 4%
  • Hand build time: 2 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • Handmade in our California factory

Voltage and current Rating:

  • US: 20amp/125v
  • (EU/AU/UK): 16amp/250v

UEF Blue High Current Power C.

3 each 10 awg. SR Copper:

  • Dielectric: (EPDM) Ethylene Propylene
  • Connector Input US: 1 each Synergistic Research C07 Pure Copper
  • Connector Input Int’l:1 each Synergistic Research C07 Pure Copper
  • Connector Output US: Synergistic Research G07 Gold IEC 15 amp
  • Connector Output Int’l:Synergistic Research G07 Gold IEC 15 amp

Build Notes:

  • Atmosphere Level 2 UEF Matrix Shielding: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Silver Solder: 4%
  • Hand build time: 2 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • Handmade in our California factory

Voltage and current Rating:

  • US: 20amp/125v
  • (EU/AU/UK): 16amp/250v

Core 2.0 UEF USB

4 each Copper Matrix conductors:

  • 23 gauge solid copper conductors
  • Dielectric: Solid Polyethylene
  • Shielding: Silver Mylar shield
  • Listened for signal direction before build
  • Handmade in our California factory

Build Notes:

  • 16 point-to-point hand crimped connections
  • Atmosphere X UEF Graphene Shield: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides
  • Quantum Treatment: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
  • Secondary Stage two UEF Blue Treatment originally developed for SR Blue Fuses
  • Hand build time: 1.0 hours
  • Handmade in our California factory

Core 2.0 UEF Ethernet

8 each UEF CAT 6:

  • 23 gauge solid copper conductors
  • Dielectric: Solid Polyethylene
  • Maximum Frequency: 500 MHz
  • Shielding: Silver Mylar
  • Geometry: 4 twisted pair
  • Listened for signal direction before build
  • Handmade in our California factory

Build Notes:

  • 16 point-to-point hand crimped connections
  • Atmosphere X UEF Graphene Shield: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides
  • Quantum Treatment: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
  • Secondary Stage two UEF Blue Treatment originally developed for SR Blue Fuses
  • Hand build time: 1.0 hours
  • Handmade in our California factory

PHONO Cables

Analog natural sound

Galileo SX Phono

Direct to the source

 

6 each (XLR) 4 each (RCA) Silver Air String cables:

  • Silver Air Strings: 99.9999% pure monocrystal silver conductor
  • Dielectric: Air (sealed)
  • Shielding: UEF Ground Plane Technology
  • Handmade in our California factory

2 each (RCA or XLR), 1 each (DIN) UEF Cell:

  • 99.9995% Pure Silver Ribbons/Copper with
  • Teflon dielectric
  • Multi conductor Silver/Copper
  • Gold plated 2.5mm tuning circuit connector

2 each (RCA or XLR), 1 each (DIN) Galileo Gold Tuning Module:

  • Optional voicing for increased warmth, liquidity

2 each (RCA or XLR), 1 each (DIN) Galileo Silver Tuning Module:

  • Optional voicing for increased refinement, detail and focus

Connectors:

  • Synergistic Research Silver SR20 RCA, XLR, Straight DIN and Right Angle DIN

Ground:

  • High Definition Ground Leads

Build Notes:

  • Individual EXP Isolated cable geometries for improved vibrational isolation
  • Galileo SX Level 5 UEF Matrix Shielding: 2 different UEF coatings with Graphene are applied to UEF Cell, connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane and UEF Cell also benefit from dampening effect that UEF provides
  • 1 Termination for Galileo SX tuning Module (Silver and Gold)
  • UEF Ground Plane
  • Silver Solder: 4%
  • Hand build time: 8 hours
  • Quantum Tunneling: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5-day Burn In: 2 step process
  • Hand Made in our California factory

Atmosphere X Phono Alive (Level 1)

2 each 4th Gen Silver Matrix RCA, 4 each 4th Gen-Silver Matrix XLR:

  • Silver Copper Matrix: Monocrystal conductors with a separate ground conductor from shield
  • Dielectric: Teflon
  • Shielding: Silver Braid -Quantum Tunneled
  • Geometry: 2 channel single ended / 6 channel balanced

RCA and XLR Connectors:

  • Silver Teflon SR 20 RCA or Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

Build Notes:

  • 8 (RCA) 12 (XLR) point-to-point hand soldered connections
  • Atmosphere Level 2 UEF Matrix Shielding: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Silver Solder: 4%
  • Hand build time: 2 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

Atmosphere X Phono Excite (Level 2)

2 each (RCA) 4 each (XLR) Tricon 4th Gen cable geometries:

  • Silver Matrix: Mono crystal conductors with a separate ground conductor from shield
  • Dielectric: Teflon
  • Shielding: UEF Ground Plane Technology
  • Geometry: 3 channel single ended / 8 channel balanced
  • Listening tests performed for signal direction before build

Geometry Count:

Each Pair of Atmosphere X Excite Phono cables are 2 separate runs of Tricon 4th Gen cables RCA -or- 4 separate runs Tricon 4th Gen cables XLR plus one Level 1 OTSP UEF Field Filter for RCA or XLR interconnects.

RCA and XLR Connectors:

  • Silver Teflon SR 20 RCA -or- Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

2 each Red Tuning Module:

  • Optional voicing for incresed warmth, liquidity

Build Notes:

  • 38 (RCA) 50 (XLR) point-to-point hand soldered connections
  • Atmosphere Level 3 UEF Matrix Treatment: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors also benefit from dampening effect that UEF provides.
  • 1 Termination for Atmosphere Tuning Module (Red)
  • Silver Solder: 4%
  • Hand build time: 4 hours
  • Quantum Tunneling: Connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5 day Burn In: 2-step process
  • Handmade in our California factory

Atmosphere X Phono Euphoria (Level 3)

2 each Tricon  4th Gen:

  • Silver Matrix: Monocrystal conductors with a separate ground conductor from shield
  • Dielectric: Teflon
  • Shielding: Ground Plane Technology
  • Listening tests performed for signal direction before build

2 each Silver Air String cables:

  • Silver Air Strings: 99.9999% pure monocrystal silver conductor
  • 4 separate conductors RCA / 4 separate conductors XLR
  • Dielectric: Air (sealed)
  • Shielding: UEF Ground Plane Technology
  • Level 3 OTSP UEF Cell Filtration
  • Handmade in our California factory

Geometry / Filter Count:

Each Pair of Euphoria Phono cables are actually 2 separate runs of Tricon 4th Gen cables plus 2 silver monofiliament conductors in air sealed dielectric  plus one UEF Level 3 OTSP 3-channel filter for ground, signal and shield for RCA or XLR interconnects.

RCA and XLR Connectors:

  • Silver Teflon SR 20 RCA -or- Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

Build Notes:

  • Euphoria Signal Matrix (proprietary)
  • 44 (RCA) 54 (XLR) point-to-point hand soldered connections
  • Individual EXP Isolated cable geometries for improved vibrational isolation
  • Atmosphere Level 4 UEF Matrix Shielding: 2 different UEF coatings with Graphene are applied to UEF Cell, connectors, cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and UEF Cell also benefit from dampening effect that UEF provides
  • 1 Termination for Atmosphere tuning Module (Red and Blue)
  • Silver Solder: 4%
  • Hand build time: 5.5 hours
  • Quantum Tunneling: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5-day Burn In: 2 step process
  • Hand Made in our California factory

Core 2.0 UEF Phono

Entry, meet next level

 

2 each 4th Gen Silver Matrix RCA, 4 each 4th Gen-Silver Matrix XLR:

  • Silver Copper Matrix: Monocrystal conductors with a separate ground conductor from shield
  • Dielectric: Teflon
  • Shielding: Silver Braid -Quantum Tunneled
  • Geometry: 2 channel single ended / 6 channel balanced

RCA and XLR Connectors:

  • Silver Teflon SR 20 RCA or Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

Build Notes:

  • 8 (RCA) 12 (XLR) point-to-point hand soldered connections
  • Atmosphere Level 2 UEF Matrix Shielding: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Silver Solder: 4%
  • Hand build time: 2 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

POWER

Control is Power

V8 PowerBlock UEF

It all starts here

  • Construction: Aircraft Aluminum
  • Dimensions: Height 3″ x Width 10.75″ x Depth 6″
  • Weight: 4.6 lbs.
  • Dielectric: PTFE
  • Connector Input:  1 each 20 amp IEC
  • Connector Output US: 8 SR Outlets (Quantum Treated)
  • Connector Output International (EU/AU/UK): 8 SR outlets (Quantum Treated)
  • Power Cable: Included UEF Red Power cable
  • 14 awg. Mil Spec Silver Matrix Multi-Stranded Wire
  • Silver Solder 4%
  • Hand Built Time: 1.5 hours
  • UEF Treatment: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Quantum Tunneling: Standard Level 1:Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • 5 Day Burn In: 2 Step Process

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

V8 PowerBlock UEF SE

Bigger sound. Compact size

  • Construction: Aircraft Aluminum
  • Dimensions: Height 3″ x Width 10.75″ x Depth 6″
  • Weight: 4.6 lbs.
  • Dielectric: PTFE
  • Connector Input:  1 each 20 amp IEC
  • Connector Output US: 8 SR HD Outlets (Quantum Treated)
  • Connector Output International (EU/AU/UK): 8 SR outlets (Quantum Treated)
  • Power Cable: UEF Black High Current Power cable
  • 12 awg. Mil Spec Silver Matrix Multi-Stranded Wire
  • Silver Solder 4%
  • Hand Built Time: 2.0 hours
  • UEF Treatment: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Quantum Tunneling: Standard Level 1:Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • 5 Day Burn In: 2 Step Process

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

* included – UEF Black High Current PowerCell power cable

PowerCell 8 UEF

Elevate your system

  • Construction: Aircraft Aluminum
  • Dimensions: Height 3″ x Width 10.75″ x Depth 6″
  • Weight: 6.6 lbs.
  • Internal Active UEF EM Perpendicular Plane Cell area: 387 square centimeters including
  • Dielectric: PTFE
  • Connector Input:  1 each 20 amp IEC
  • Connector Output US: 8 Outlets (Quantum Treated)
  • Connector Output International (EU/AU/UK): 8 outlets (Quantum Treated)
  • Power Cable: UEF Black High Current power cable
  • 12 awg. Mil Spec Silver Matrix Multi-Stranded Wire
  • Swiss-made “Active Power Supply”
  • SR Quantum Capacitors
  • Silver Solder 4%
  • Hand Built Time: 2.5 hours
  • Quantum Tunneling: Standard Level 1
  • 5 Day Burn In: 2 Step Process

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

* included – UEF Black PowerCell power cable

PowerCell 8 UEF SE

American muscle

  • Construction: Aircraft Aluminum
  • Dimensions: Height 3″ x Width 10.75″ x Depth 6″
  • Weight: 6.6 lbs.
  • Internal Active UEF EM Perpendicular Plane Cell area: 387 square centimeters including
  • Dielectric: PTFE
  • Connector Input:  1 each 20 amp IEC
  • Connector Output US: 8 UEF BLUE Outlets (Two Stage Quantum Treated)
  • Connector Output International (EU/AU/UK): 8 UEF BLUE Schuko outlets (Two Stage Quantum Treated)
  • 99.995% Pure Silver Ground Strap: 62 square centimeters
  • Power Cable: Atmosphere Level 2 PowerCell Power Cable
  • 12 awg. Mil Spec Silver Matrix Multi-Stranded Wire
  • Swiss-made “Active Power Supply”
  • SR Quantum Capacitors
  • Point-to-point wiring
  • Silver Solder 4%
  • Hand Built Time: 2.5 hours
  • Quantum Tunneling: Standard Level 2
  • 5 Day Burn In: 2 Step Process

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

* included – Atmosphere Level 2 PowerCell power cable

PowerCell 12 UEF

Unlimited power

  • All 12 awg. Silver Matrix wiring
  • Connector Output US: 12 TeslaPlex SE Outlets (Quantum Treated)
  • Connector Output International (EU/AU/UK): 12 TeslaPlex Schuko outlets (Quantum Treated)
  • UEF – Graphene treatment throughout unit
  • Handcrafted SR UEF Active Power Supply
  • 2nd generation Internal ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
  • 2 each SR Power Transformers
  • 8 each SR Quantum Capacitors in EM Cell power supply and ULF field generator
  • High Carbon Steel/Aluminum “Ground Plane” chassis
  • New 6 EM Cell topology acts like a ‘Supercapacitor’ to increase peak current on demand allowing components to draw more current than when connected directly to the wall for added dynamic headroom
  • Internal Active UEF EM Horizontal Plane Cell area: 640 square centimeters
  • 5 x Internal Active UEF EM Folded Carbon Fiber Cell area: 2343.15 square centimeters total
  • Connector Input: 1 each Neutrik 32 amp PowerCon
  • 2 Isolated Output Banks; can be used to isolate analog from digital components
  • 99.995% Pure Silver Ground Strap: 62 square centimeters
  • 1 each special 10-gauge UEF Black High Current power cord
  • Height 5.5″ x Width 17.5″ x Depth 13.5″
  • Weight: 19 lbs.

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

* included – UEF Black High Current power cable

PowerCell 12 UEF S

Power to transform

  • All 10 and 12 awg. Silver Matrix, Teflon-coated wiring
  • Connector Output US: 12 each Black UEF Outlets (Two stage Quantum Treatment)
  • Connector Output International (EU/AU/UK): 12 each Black UEF Schuko outlets (Two stage Quantum Treatment)
  • UEF – Graphene treatment throughout unit
  • Internal “Active” power supply for biasing EM Cells
  • 2nd generation Internal ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
  • 2 each SR Power Transformers
  • 8 each SR Quantum Capacitors in EM Cell power supply and ULF field generator
  • High Carbon Steel/Aluminum “Ground Plane” chassis
  • New 6 EM Cell topology acts like a ‘Super Capacitor’ to increase peak current on demand allowing components to draw more current than when connected directly to the wall for added dynamic headroom
  • Internal Active UEF EM Horizontal Plane Cell area: 640 square centimeters
  • 5 x Internal Active UEF EM Folded Carbon Fiber Cell area: 2343.15 square centimeters total
  • Connector Input: 1 each Neutrik 32 amp PowerCon
  • 2 Isolated Output Banks; can be used to isolate analog from digital components
  • 99.995% Pure Silver Ground Strap: 62 square centimeters
  • 1 each special 10-gauge Atmosphere Level 3 Active PowerCell power cord that does not require a separate MPC, just plug and play like standard non-active power cords—no extra wires
  • Height 5.5″ x Width 17.5″ x Depth 13.5″
  • Weight: 19 lbs.

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

* included – Atmosphere Level 3 AC

PowerCell 12 UEF SE

See what condition your condition is in

  • All 10 awg. Silver Matrix point-to-point discrete wiring

Connector Output US:

  • 12 each Black UEF Outlets (Two stage Quantum Treatment)

Connector Output International (EU/AU/UK):

  • 12 each BLUE UEF Schuko outlets (Two stage Quantum Treatment)

UEF:

  • Graphene treatment throughout unit
  • Internal “Active” power supply for biasing EM Cells
  • 2nd generation Internal ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
  • 2 each SR Power Transformers
  • 8 each SR Quantum Capacitors in EM Cell power supply and ULF field generator
  • High Carbon Steel/Aluminum “Ground Plane” chassis
  • New 6 EM Cell topology acts like a ‘Super Capacitor’ to increase peak current on demand allowing components to draw more current than when connected directly to the wall for added dynamic headroom

Internal Active UEF EM Horizontal Plane Cell area:

  • 640 square centimeters
  • 5 x Internal Active UEF EM Folded Carbon Fiber Cell area: 2343.15 square centimeters total

Connector Input:

  • 1 each Neutrik 32 amp PowerCon
  • 2 Isolated Output Banks; can be used to isolate analog from digital components

99.995% Pure Silver Ground Strap:

  • 62 square centimeters
  • 1 each special 10-gauge Atmosphere Level 3 Active PowerCell power cord that does not require a separate MPC, just plug and play like standard non-active power cords—no extra wires

Weight and Dimensions:

  • 5.5″ x Width 17.5″ x Depth 13.5″
  • 19 lbs.

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

* included – Atmosphere Level 3 AC

Galileo PowerCell SX

Wiring

  • 59ft. Parallel 14 awg. 6N Pure silver airstring wiring

Connector Output US:

  • 12 each Black UEF Outlets (Two stage Quantum Treatment)

Connector Output International (EU/AU/UK):

  • 12 each BLUE UEF Schuko outlets (Two stage Quantum Treatment)

UEF:

  • Graphene treatment throughout unit
  • Internal “Active” power supply for biasing EM Cells
  • 3rd generation Internal ULF (Ultra-low frequency) Generator applied to each individual electromagnetic cell to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor.
  • 2 each SR Power Transformers
  • 8 each SR Quantum Capacitors in EM Cell power supply and ULF field generator
  • High Carbon Steel/Aluminum “Ground Plane” chassis
  • New 11 EM Cell topology acts like a ‘Super Capacitor’ to increase peak current on demand allowing components to draw more current than when connected directly to the wall for added dynamic headroom

Internal Active UEF EM Horizontal Plane Cell area:

  • 640 square centimeters
  • 5 x Internal Active UEF EM Folded Carbon Fiber Cell area: 2343.15 square centimeters total

Connector Input:

  • 1 each Neutrik 32 amp PowerCon
  • 2 Isolated Output Banks; can be used to isolate analog from digital components

99.995% Pure Silver Ground Strap:

  • 62 square centimeters

Weight and Dimensions:

  • 5.5″ x Width 17.5″ x Depth 13.5″
  • 39 lbs.

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v
  • International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v

* Cable included – two options:

  1. 5ft. Galileo SX power cable  OR
  2. 6ft. SRX power cable

Active Ground Block SE

The heart of your system

Applications:

  • Synergistic Research Galileo UEF and Atmosphere Cables
  • Synergistic Research Tranquility Bases
  • Synergistic Research Atmospheres
  • Turntables – Standard or Small Spade Connect to Ground Post on Turntable
  • Phono-stage – Standard or Small Spade Connect to Ground Post
  • Digital to Analog Converters (DACs) – Connect to spare Digital Input, Output or Chassis Ground
  • Reel to Reel Tape – Connect to spare Analog Input, Output or Chassis Ground
  • Pre-Amplifiers – Connect to spare Analog Input, Output or Chassis Ground
  • Power Amplifiers – Connect to spare Analog Input, Output or Chassis Ground.
  • USB Devices – Connect to spare USB Input, Output or Chassis Ground
  • Audio Computers – 3.5mm Headphone Jack
  • Any Component with an active circuit inside – Connect to spare Input, Output or Chassis Ground

Specifications:

  • Construction: Aircraft Aluminum
  • Dimensions: Height 3″ x Width 10.75″ x Depth 6″
  • Weight: 5.5 lbs.
  • Internal Active UEF
  • Connector Input:  1 each 15 amp IEC
  • 99.995% Pure Silver Ground Strap: 52 square centimeters
  • SR Quantum Capacitor
  • Point-to-point wiring
  • Silver Solder 4%
  • Hand Built Time: 2.5 hours
  • Quantum Tunneling: Standard Level 2
  • 5 Day Burn In: 2 Step Process

Voltage and current Rating:

  • Input rating US: 15amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v

Connector Input :

  • 44 each 2mm ground ports

UEF:

  • Graphene treatment throughout unit
  • Internal “Active” power supply for biasing EM Cells
  • 2nd generation Internal ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
  • 1 each SR Power Transformers
  • 1 each SR Quantum Capacitor in EM Cell power supply and ULF field generator

Connector Input:

  • 1 each  15 amp IEC
  • 1 each On/Off switch
  • 1 each SR Black 1.6A Fuse

99.995% Pure Silver

  • 52 square centimeters

Available connections for other SR products with SR Ground Plane Technology:

  • Synergistic Research Atmosphere: Acoustic Wave Generator
  • Synergistic Research FEQ: Frequency Equalizer
  • Synergistic Research Tranquility Base Products

Optional High-Def connectivity ground cables are available for the following applications:

  • Turntables: Connect to Ground Plug on Turntable
  • Digital to Analog Converters (DACs): Connect to spare Digital Input, Output or Chassis Ground
  • Pre-Amplifiers: Connect to spare Analog Input, Output or Chassis Ground
  • Power Amplifiers: Connect to spare Analog Input, Output or Chassis Ground.
  • USB Devices: Connect to spare USB Input, Output or Chassis Ground
  • Any Component with an active circuit inside: Connect to spare Input, Output or Chassis Ground

*** included:

  • Atmosphere Active Ground Block power cable with Galileo UEF Tuning Modules
  • All models come with (4) 4ft and (2) 8ft standard ground leads for use with Atmosphere and Galileo UEF Cables.

Active Ground Block

The heart of your system

Applications:

  • Synergistic Research Galileo UEF and Atmosphere Cables
  • Synergistic Research Tranquility Bases
  • Synergistic Research Atmospheres
  • Turntables – Standard or Small Spade Connect to Ground Post on Turntable
  • Phono-stage – Standard or Small Spade Connect to Ground Post
  • Digital to Analog Converters (DACs) – Connect to spare Digital Input, Output or Chassis Ground
  • Reel to Reel Tape – Connect to spare Analog Input, Output or Chassis Ground
  • Pre-Amplifiers – Connect to spare Analog Input, Output or Chassis Ground
  • Power Amplifiers – Connect to spare Analog Input, Output or Chassis Ground.
  • USB Devices – Connect to spare USB Input, Output or Chassis Ground
  • Audio Computers – 3.5mm Headphone Jack
  • Any Component with an active circuit inside – Connect to spare Input, Output or Chassis Ground

Specifications:

  • Construction: Aircraft Aluminum
  • Dimensions: Height 3″ x Width 10.75″ x Depth 6″
  • Weight: 5.5 lbs.
  • Internal Active UEF
  • Connector Input:  1 each 15 amp IEC
  • 99.995% Pure Silver Ground Strap: 52 square centimeters
  • SR Quantum Capacitor
  • Point-to-point wiring
  • Silver Solder 4%
  • Hand Built Time: 2.5 hours
  • Quantum Tunneling: Standard Level 2
  • 5 Day Burn In: 2 Step Process

Voltage and current Rating:

  • Input rating US: 15amp/125v
  • Input Rating International (EU/AU/UK): 16amp/250v

Connector Input :

  • 44 each 2mm ground ports

UEF:

  • Graphene treatment throughout unit
  • 2nd generation Internal ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
  • 1 each SR Power Transformers
  • 1 each SR Quantum Capacitor in ULF field generator

Connector Input:

  • 1 each  15 amp IEC
  • 1 each On/Off switch
  • 1 each SR Black 1.6A Fuse

99.995% Pure Silver

  • 52 square centimeters

Available connections for other SR products with SR Ground Plane Technology:

  • Synergistic Research Atmosphere: Acoustic Wave Generator
  • Synergistic Research FEQ: Frequency Equalizer
  • Synergistic Research Tranquility Base Products

Optional High-Def connectivity ground cables are available for the following applications:

  • Turntables: Connect to Ground Plug on Turntable
  • Digital to Analog Converters (DACs): Connect to spare Digital Input, Output or Chassis Ground
  • Pre-Amplifiers: Connect to spare Analog Input, Output or Chassis Ground
  • Power Amplifiers: Connect to spare Analog Input, Output or Chassis Ground.
  • USB Devices: Connect to spare USB Input, Output or Chassis Ground
  • Any Component with an active circuit inside: Connect to spare Input, Output or Chassis Ground

*** included:

  • UEF Black 10awg power cable
  • All models come with (4) 4ft and (2) 8ft standard ground leads for use with Atmosphere and Galileo UEF Cables.

Ground Block

Calm the noise

Applications:

  • Synergistic Research Galileo UEF and Atmosphere Cables
  • Synergistic Research Tranquility Bases
  • Synergistic Research Atmospheres
  • Turntables – Standard or Small Spade Connect to Ground Post on Turntable
  • Phono-stage – Standard or Small Spade Connect to Ground Post
  • Digital to Analog Converters (DACs) – Connect to spare Digital Input, Output or Chassis Ground
  • Reel to Reel Tape – Connect to spare Analog Input, Output or Chassis Ground
  • Pre-Amplifiers – Connect to spare Analog Input, Output or Chassis Ground
  • Power Amplifiers – Connect to spare Analog Input, Output or Chassis Ground.
  • USB Devices – Connect to spare USB Input, Output or Chassis Ground
  • Audio Computers – 3.5mm Headphone Jack
  • Any Component with an active circuit inside – Connect to spare Input, Output or Chassis Ground

Specifications:

  • 1 each (10 ft) standard wall ground wire to connect SR Ground Block to the wall
  • 4 each (4 ft) standard ground wires: Enough to connect up to 2 pairs of SR Atmosphere or Galileo UEF Series Interconnects or Speaker Cables
  • 2 each (8 ft) standard ground wires: Enough to connect 1 pair of SR Atmosphere or Galileo UEF Series Interconnects or Speaker Cables

Available connections for other SR products with SR Ground Plane Technology:

  • Synergistic Research Atmosphere: Acoustic Wave Generator
  • Synergistic Research FEQ: Frequency Equalizer
  • Synergistic Research Tranquility Base Products

Optional High-Def connectivity ground cables are available for the following applications:

  • Turntables: Connect to Ground Plug on Turntable
  • Digital to Analog Converters (DACs): Connect to spare Digital Input, Output or Chassis Ground
  • Pre-Amplifiers: Connect to spare Analog Input, Output or Chassis Ground
  • Power Amplifiers: Connect to spare Analog Input, Output or Chassis Ground.
  • USB Devices: Connect to spare USB Input, Output or Chassis Ground
  • Any Component with an active circuit inside: Connect to spare Input, Output or Chassis Ground

HD Ground Cable

One for every application

Applications:

  • Synergistic Research Galileo UEF and Atmosphere Cables
  • Synergistic Research Tranquility Bases
  • Synergistic Research Atmospheres
  • Turntables – Standard or Small Spade Connect to Ground Post on Turntable
  • Phono-stage – Standard or Small Spade Connect to Ground Post
  • Digital to Analog Converters (DACs) – Connect to spare Digital Input, Output or Chassis Ground
  • Reel to Reel Tape – Connect to spare Analog Input, Output or Chassis Ground
  • Pre-Amplifiers – Connect to spare Analog Input, Output or Chassis Ground
  • Power Amplifiers – Connect to spare Analog Input, Output or Chassis Ground.
  • USB Devices – Connect to spare USB Input, Output or Chassis Ground
  • Audio Computers – 3.5mm Headphone Jack
  • Any Component with an active circuit inside – Connect to spare Input, Output or Chassis Ground

Specifications:

2 each 4th Gen-Tricon RCA, 4 each 4th Gen-Tricon XLR:

  • Silver Copper Matrix: Monocrystal conductors with a separate ground conductor from shield
  • Dielectric: Teflon
  • Shielding: Silver Braid -Quantum Tunneled
  • Geometry: 2 channel single ended / 6 channel balanced

RCA and XLR Connectors:

  • Silver Teflon SR 20 RCA or Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

Build Notes:

  • 8 (RCA) 12 (XLR) point-to-point hand soldered connections
  • Atmosphere UEF 2 Treatment: UEF coating with Graphene is applied directly to connectors significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail
  • Silver Solder: 4%
  • Hand build time: 1.5 hours
  • Quantum Tunneling: Post Production process, 1 million volts are passed through finished cable providing a “canal” that allows electrons to pass more freely through conductor material and connections
  • 5 day Burn-in: 2 step process
  • Handmade in our California factory

Basic Ground Cable

One for every application

Even though the SR Grounding Block was engineered to improve ground performance on our new Atmosphere Series Level 2, 3 and 4 interconnects and speaker cables as well as all SR products with external ground plane connections like Galileo, Tranquility Base isolation platforms, FEQ and Atmosphere wave generators, we have adapted it’s use to include virtually every component in your system. Now you can drastically improve your entire system by “star grounding” to lower noise and allow all your music to come through.

QLS (Quantum Line Strip)

Pick your power. Available in Schuko

Revive your music by plugging your components into a QLS, (Quantum Line Strip). The QLS features 6 or 9 (5 or 7 in the Schuko version) generously spaced, individual TESLA Power outlets guaranteed to improve your system’s performance. These AC line strips are Quantum Tunneled, passing 1’000’000 volts of electricity, pulse modulated at extreme high frequencies through each of the outlets. This creates a path on the conductor’s surface that allows electrons to flow more freely, opening up the music and giving uncompressed, realistic live sound. Each QLS is terminated with an IEC connector so you can upgrade it’s performance by upgrading the power cable, from a UEF Red all the way to Atmosphere Level 3, (sold separately). The unique Quantum Tunneling treatment produces a relaxed sound, with a wide and deep soundstage. This is one giant killer of a strip! Combine one or more of these strips with a UEF PowerCell and TeslaPlex or UEF Black wall outlet for Pure Limitless Power throughout your entire system.

ACOUSTICS

Tune your environment

Atmosphere XL4

Atmosphere XL has four times the broadcast strength of the original Atmosphere to immerse you in Atmosphere’s seven acoustic scenes so convincingly you’ll swear you’re at the live event. Simply install the downloadable Atmosphere Control App to your iPad and select from a gallery of scenes. Your iPad then sends a Bluetooth command to Atmosphere altering it’s broadcast to recalibrate the acoustic response of all UEF products in your room to match the size and intent of which ever recording you’re listening to. Engineered to work in conjunction with either HFT’s or UEF Acoustic Panels and DOTs, Atmosphere’s signal wirelessly recalibrates the response or your room to better recreate your favorite recordings. In fact Atmosphere not only improves your acoustic and UEF Acoustic treatment like HFT’s and UEF Acoustic Panels and DOT’s, it also dramatically improves the function of all Synergistic Research UEF products including cables, Black Box, Ground Block and Tranquility Bases for a night and day improvement in sound quality.

*** included Red ATM

Dimensions – 52″ tall  (Base 9″ wide x 8.25″ deep)

Atmosphere

The original Atmosphere multi-channel signal generator will improve the sound of any system and work in any size room and with the easy to use iPad app you will be hearing your music like never before. Carefully calibrated to compliment an infinite variety of music, different systems, and even rooms with known issues, like an abundance of glass or hard reflective surfaces. Simply pick from the 3 base scenes- Intimate Acoustic, Hologram, and Grand Canyon to calibrate Atmosphere’s field to the type of music you’re listening to. Ramp up Atmosphere’s performance by adding a Red or Green ATM, (Atmosphere Tuning Module).

Dimensions – 39″ tall  (Base 9″ wide x 8.25″ deep)

Atmosphere Mini

This small but mighty version of Atmosphere has been designed for medium and smaller rooms where space is limited. Atmosphere Mini has the full function of it’s older brother and uses the same iPad app to produce stunning holographic soundstages at a press of a button. Simply pick from the 3 base scenes- Intimate Acoustic, Hologram, and Grand Canyon to calibrate Atmosphere’s field to the type of music you’re listening to. Ramp up Atmosphere’s performance by adding a Red or Green ATM, (Atmosphere Tuning Module).

Dimensions – 14″ tall  (Base 4.1″ wide x 4.1″ deep)

FEQ

The FEQ is a single channel ULF (Ultra Low Frequency) RF pulse generator that acts as a low frequency dither to overpower the ambient RFI and EMI fields in your listening room. Simply plug the FEQ and its internal Ground-Plane into two separate wall sockets in your listening room. Then place the FEQ behind and between your two main speakers and turn it on for an immediate and unmistakable improvement in sound. One FEQ will improve an average size listening room with a greater sense of clarity, a lower noise floor and natural uncompressed harmonics.

Dimensions – 7.5″ tall  (Base 4.1″ wide x 4.1″ deep)

ATM Red

An astounding transformation of your system’s musical presentation occurs simply by placing a Red Atmosphere Tuning Module (ATM) on or around your speakers. How can such a small thing cause such a grand improvement? All frequencies are related to and interconnected with each other and positively affected by the oscillating ATM excited by sound waves within your room.  The walls of your room will fall away as you begin to hear spacial queues and low level ambient information start to surround you, while any harshness in your system is augmented into refined delicate musical tones.

ATM Green

The new “Green” ATM or Atmosphere Tuning Module is a significant breakthrough in acoustic resolution for the Synergistic Research Atmosphere Field Generator as well as being used on it’s own within a listening room. Compared directly to the original Red ATM the Green ATM is a faster resonator portraying acoustics and recordings with a lower noise floor for enhanced detail and air. Notes seem to decay into a darker background while the overall sound field seems to extend further in all directions; front to back, side to side and top to bottom. Use 1 Green ATM on the front wall, in close proximity, between your speakers or add a second Green ATM and place them directly on top of your speakers.

HFTs

Tune your acoustics

About the size of a shirt button, yet powerful enough to transform the way you experience music, HFT’s improve nearly all aspects of system and room performance. With HFT’s your speakers and room disappear leaving you with nothing but a live holographic musical event in your listening room, or living room. HFTs oscillate at high frequencies creating an energy field in your room that overpowers room vibrational distortions to correct phase and frequency interactions for harmonic balance in your treated room. You hear an increase in depth and width, with clearer more extended highs, and tighter bass. Everything sounds more live, clearer, and more natural than you could ever imagine.

HFT Box

The original HFT’s will make up the bulk of your HFT acoustic treatment. Most rooms are recommend to start with 15-20 standard HFT’s. Your speakers and room will disappear as your soundstage expands into a realistic and holographic representation of the musical event with improved frequency response from top to bottom.

HFT 2 Box

HFT 2.0’s are added to your room’s existing HFT installation to create warmth and musicality. A combination of standard HFTs, HFT 2.0 and HFT X will provide the most balanced results.

HFT X Box

HFT X’s are added to your existing HFT installation to add focus, resolution and air. A combination of standard HFTs, HFT 2.0 and HFT X will provide the most balanced results.

HFTSpeakerKit

HFT speaker Kits come with (2) Standard HFT’s (2) HFT 2.0’s and (2) HFT X’s or enough to treat (1) speaker. The combination of the 3 HFT types is ideal for most speakers. With easy to follow placement guidelines you will dramatically improve your speakers ability to disappear in your room with tighter bass, improved mid-range clarity, and smoother more articulate highs.

HFTwide

HFT Wide Angle’s are added sparingly to a room already treated with HFT’s. With a wider and more powerful dispersion pattern they dramatically increase your sense of immersion in the sound field while expanding the scale and dimension of your soundstage.

Acoustic Art

Control is beauty

 

Before there was UEF Tech there was Acoustic ART, our first foray into the field of sympathetic resonance as an alternate means of treating room acoustics. Vibratron is a handmade multi-frequency resonator that anchors the focal point of your soundfield to your listening room to expand and clarify your listening experience. Vibratron works by resonating in response to acoustic pressure created by your speakers. When Vibratron is excited it radiates an even order harmonic in a 360 degree wave pattern in sympathy with the music to focuses and expands your soundstage. Additionally Vibratron improves your room’s acoustic response to music creating a more organic and musical sound. Acoustic instruments sound natural with organic timbre while female vocals sound present and three dimensional. Vibratron can be tuned with included magnets that dampen it’s response so you can fine tune its response to acoustic pressure in your listening room. To get the most from Vibratron it is highly recommended that you consult with either the factory or your dealer who will advise you on placement as well as other accoustic components our Black Box that work synergistically together to create a whole greater than the sum of its parts.

 

Acoustic Art Bass Station

Acoustic Art Magnitron

Acoustic Art Gravitron

Acoustic Art Basik

 

Acoustic Art Bass Station Acoustic Art Bass Station

Details Coming Soon

Icon Download BonWView Manual

UEF Acoustic Panels

More coverage. More Control

 

Realistic 3-dimensional soundstage and music that just hangs in the air, an experience that no other conventional acoustic room treatment can attain. Developed for recording studio applications, the easy to install UEF Acoustic Panels are currently being used by Grammy Award winning recording and mastering engineers. UEF Acoustic Panels do not rely on traditional dampening, therefore they do not compress your system’s ability to create a holographic sound field. Experience music with breathtaking clarity and realism not possible from any other known acoustic treatment or DSP Room Correction. UEF Acoustic Panels work by themselves or in tandem with traditional room treatments or with Synergistic Research’s FEQ and Atmosphere Room Correction devices.

 

Acoustics 4 Panel And Dots

 

Icon Download BonWView Manual

UEF Acoustic Dots

Subtle power. Invisible, musical, essential

 

UEF Acoustic Dots are the least obtrusive room treatment in the world. Flat and painted a neutral off white, they are less visible than our award winning HFT’s yet powerful enough to transform even problematic acoustic spaces. For best results peel and stick Dots around your listening room in prescribed tiers of 10-Dots per level to incrementally transform your listening experience. Being a pure UEF Technology, Dots have the added ability to improve the performance of your electronics and speakers as well. Just peel and stick Dots near vacuum tubes, IEC’s where you connect your power cords to the back of your electronics, or on the sides of speakers to hear your system and room disappear. UEF Acoustic Dots are guaranteed to work or your money back.

 

Dots

 

Icon Download BonWView Manual

Black Box

Deep space meet deep bass

 

There is no other compact acoustic treatment device that you can place in your listening room to solve your low frequency problems except the Synergistic Research Black Box. Based on our award-winning and patented sympathetic resonance technology, the Black Box is an (all in one) Broad Spectrum Low-Frequency Resonator Array with UEF Tech that effectively eliminates bass nodes while expanding your room’s ability to accurately portray low frequency information and spacial content. Working from the principal that all frequencies in the audible bandwidth are linked through harmonics, the Black Box balances low frequencies, mid-range, and high frequencies through a mathematically derived algorithm based on tuned sympathetic resonance. So when you get the phase correct at 20Hz for example, it clears up every multiple of 20Hz so, 40Hz, 80Hz, 160Hz and on.

Even if you don’t have a bass problem in your listening room you can benefit from the Black Box. With improved low frequency definition in perfect phase alignment with all frequencies that make up your favorte music you hear natural sounding bass in a holographic soundstage with mid’s and high’s that sound natural and transparent. And unlike large bass traps, the Black Box performs this feat in a small, aesthetically pleasing package. The Black Box sits on 3 stiletto spikes decoupling it from your floor for improved response. Black Box measures only 9.5″L X 9.5″W X 6″H (8″ when spiked) and weighs about 8 lbs.

P. BlackBox 3 PrimaryP. BlackBox 3 Optional

 

Isolation & Accessories

Tranquility base UEF XL

More Powerful than Base due to 9 layer construction

 

  • 23.25″W x 20″D x 1.5″H
  • Active UEF Em Cell
  • Ground Plane Technology
  • Ground Out for TT
  • 9 Layer Isolation Laminate
  • 1 Single Lead MPC Power Supply
  • Extruded Aluminum Base
  • 2 sets MiG 2.0 included

 

View ManualIcon Download BonW

Tranquility base UEF

More Powerful than basik due to Integrated Ground Plane and 6 layer construction

 

  • 18.5″W x 16″D x 1.5″H
  • Active UEF Em Cell
  • Ground Plane Technology
  • 6 Layer Vibration Isolation Laminate
  • 1 Single Lead MPC Power Supply
  • Cast Aluminum Base
  • 2 sets MiG 2.0 included

 

View ManIcon Download BonWual

Tranquility basik UEF

  • 17″W x 14″D x 1″H
  • Active UEF Em Cell
  • 3 Layer Vibration Isolation Laminate
  • 1 Single Lead MPC Power Supply
  • 1 set MiG 2.0 included

 

View ManIcon Download BonWual

MiG 2.0

MiG 2.0 builds on the performance of the original MiG with the inclusion of a specially tuned high frequency transducer similar to our HFT room treatments. The 2.0’s balance is extended with high frequency air that makes music sound as if it is decaying into infinity. Perfect for high resolution systems that are well sorted, tube based systems or systems that need help with high frequency extension, simply experiment with your two placement options, Pin-Point and Ambient, to find your perfect system match. You may also want to experiment with MiG’s and MiG 2.0’s for a bespoke solution that fits your system and personal tastes to a tee.

 

Placement instruIcon Download BonWctions

MiG

The original MiG or Mechanical Interface Ground is a superb footer that excels with a warm natural balance that can be tuned through two placement options to best match your system. Placing just one or two sets of MiG’s under your components can deliver a significant increase in sound staging with a balanced to slightly warm tonal balance.

 

Placement instruIcon Download BonWctions

ECT

Electronic Circuit Transducer

You now have the ability elevate the performance of any piece of audio gear with little more than a screwdriver, or an allen wrench, at home. Simply apply a few ECT’s in each of your system’s components for a significant and cost effective improvement in sound quality.

ECTs clean up high frequency noise that otherwise distort harmonic structures within the music signal. When ECTs are placed on or in an electronic device UEF nano-particles within the ECTs are excited by the components EM fields and in turn are balanced by the ECTs reaction through the process of inductive coupling. With ECT’s you hear music with a lower noise floor, higher resolution and a significant increase in soundstage scale with improved mid-range clarity and low frequency control. In fact once you place ECTs in your system, you’ll never want to take them out. Available for a risk-free, 30-day in-home trial, audition ECT’s with complete confidence.

 

Placement GuiIcon Download BonWde

GCT

GCT – Ground Circuit Transducer

GCTs are engineered to clean up the ground in your components at the circuit level. Even if you are already using a ground filter like our Active and Passive Ground Blocks, GCTs can create a dramatic effect. A variation of our popular ECT, simply a place GCT near the grounding point in any circuit or component for an immediate improvement in sound quality. Noticeable benefits are increased warmth and harmonic richness, increased soundstage realism thanks to a lowering of your components noise floor, and increased musicality.

GCTs can also be used to increase warmth and richness when placed on or near fuses in your components. Simply adhere a GCT to your fuse holder, even if that fuse is at the back of your component or in the IEC port, and you’ll hear added body and improved high-frequency response that is never fatiguing.

GCTs like Synergistic Research fuses are sold with a 30-day no-risk money back guarantee so you can try GCTs in your system and hear for yourself the power of Synergistic Research!

(1 piece per component recommended)

 

  Placement GuiIcon Download BonWde

PHT

PHT – Turntable

Get more from your analog rig when you add PHT (pronounced ‘POT’) to upgrade your phono cartridge all without ever changing your phono cartridge. Simply apply one PHT -or- Phono Transducer, either Type ‘I” or Type ‘S’ atop your phono cartridge or head-shell and immediately hear a dramatic shift in presentation. Of course like all UEF based tech you hear a lower noise floor, increased resolution, and improved bass extension with increased air and soundstaging. Available in two distinct strains, the Type ‘I’ Black Widow PHT’s add holographic realism to your recordings while Type ‘S’ Green Dream is all about focus, clarity, and musicality.

Available in two distinct strains:
Type ‘I’ PHT is called Black Widow. Its sound is ethereal, lush and holographic. You’ll definitely ‘trip out’ the first time you experience your system on Black Widow!

Type ‘S’ PHT is called Green Dream. Its sound is focused, precise and musical. The first time you listen to your favorite records on Green Dream you hear your record collection anew with before unnoticed spacial cues and clarity you never dreamt possible. It’s like getting a new and altogether higher grade cartridge all by simply adding one tiny PHT to your analogue rig!

Owning both Black Widow and Green Dream PHTs is like having two state-of-the-art cartridges costing thousands of dollars each, for the price of a good stylus pressure gauge!

 

Placement GuiIcon Download BonWde

XOT Carbon

Hear more of what you love about your speakers. Upgrade and enhance your speaker’s performance and get more satisfaction from your music by attaching XOT Carbon High Frequency Transducers to directly to the binding posts. XOT Carbons are high frequency filters specifically designed for your speaker’s crossovers. They scrub the nasty EM fields that adversely effect your music. The powerful XOTs clean up high frequency noise that otherwise distorts harmonic structures within the music signal. UEF particles within the XOTs are excited by the EM fields, in turn the EM fields become balanced by the XOTs and more phase correct information is achieved. You will hear a lower noise floor, higher resolution and a significant increase in soundstage air with improved mid-range clarity and improved low frequency control for a more holographic and musical presentation. Terminated in either spade or banana connections, XOTs are sold with a no-risk 30-day money back guarantee.

BLUE Fuse

The Blues never sounded so good

 

The new SR BLUE Quantum Fuse was developed over a two year period and represents our most advanced UEF Technology to date. At its heart is a completely new UEF / Graphene coating that delivers a dramatic increase in resolution and holographic realism over SR Black. And thanks to a new conditioning process, break-in time is cut in half. In fact a brand new out-of-the-box BLUE Fuse should significantly out perform a fully broken-in BLACK Fuse and it only gets better from there with full performance after 200 hrs of continues power. To find out how good your components really are audition the new SR BLUE Quantum Fuse today.

BLACK Fuse

You’ll never go back

 

SR Black Fuses encompass our latest understanding of passive Quantum Inductive Coupling and are our most powerful fuses to date. In addition to a proprietary conditioning process followed by a 1,000,000 volt signal we call Quantum Tunneling that alters conductive pathways within the burn wire, we add a Quantum Inductive Surface that includes Graphene to stabilize the electrical wave feeding your system for a dramatic improvement in system performance over standard and audio-grade fuses.

RED Fuse

Hearing is believing

 

Synergistic Research Red Fuses employ a specially developed burn wire selected in blind listening tests for its ability to improve sound. Next we treat the fuse with a proprietary conditioning process followed by 1,000,000 volts of electricity in a process we call Quantum Tunneling that affects how electricity travels along the fuse for an unmistakable improvement in sound quality. All Synergistic Research fuses are sold with an unconditional 30-day money back guarantee so you can explore what these powerful fuses can do for your system, without obligation to keep them if you are not 100% satisfied.