Dr. Feickert Analogue
… was not simple. From the very beginning it was clear that we want to excel our older products transferring their virtues into a traditional chassis. So we were looking for new ways to reach this goal and get the results we were looking for …
After a lot of refinement we found a way to get correct interaction of only one mass layer with the chassis. At the same time our focus was on „ease of use“ with features like the sliding armbase with pivot-spindle scale. This approach allows you to change tonearms within a couple of minutes and imagine how easy it can be to set up a tonearm this way …
Portfolio
Volare
Belt-drive turntable
Quick swap mechanism for armboards
Dimensions: 420 mm x 360 mm x 125 mm
Armboard: 205 – 240 mm pivot-spindle (9 – 10 inches effective length)
Weight: 17,5 kg (w/o tonearm, aluminium platter)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Options:
- Volare (aluminium silver or black, spike feet, aluminium platter)
- Volare + (aluminium silver or black, spike feet, PO+ platter, Linear PSU)
- Volare TS (aluminium silver or black, spike feet, aluminium platter, Jelco TS-350S-DF with azimuth headshell)
- Volare TS+ (aluminium silver or black, spike feet, PO+ platter, Linear PSU, Jelco TS-350S-DF with azimuth headshell)
Woodpecker
Belt drive turntable quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment (optional)
Dimensions: 480 mm x 380 mm x 140 mm
Armboard: 205 – 300 mm pivot-spindle (9 – 12 inch eff. length)
Weight: 13,5 kg (chassis), 18 kg (without tonearm)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Blackbird
Belt drive turntable, 2 motors, 2 tonearms quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment.
Dimensions: 530 mm x 420 mm x 150 mm
Armboard right: 205 – 320 mm pivot-spindle (9 – 13 inch eff. length)
Armboard left (optional): 205 – 240 mm pivot-spindle (9 – 10 inch eff. length)
Weight: 17,5 kg (chassis), 22 kg (without tonearm)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Venti
Belt drive turntable, 3 motors, 1 tonearms quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment.
New and very stylishly looking Dr. Feickert Venti turntable. Venti that uses three motors marks the 20th anniversary of the Chris’s very first turntable creation.
Firebird
Belt drive turntable, 3 motors, 2 tonearms quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment.
Dimensions: 560 mm x 460 mm x 160 mm
Right arm-slot: 205 – 345 mm pivot-spindle (9 – 14 inch eff. length)
Left arm-slot (optional): 205 – 300 mm pivot-spindle (9 – 12 inch eff. length)
Weight: 23 kg (chassis), 29 kg (without tonearm)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Linear
On our enduring research on revealing all details from vinyl records not only mechanical parameters are of importance. Even more, electrical parameters come into focus when having reached a high level of mechanical perfection…
- linear regulated, low-noise-power supply
- auto-detection of primary voltage
- 24 V / 500 mA DC sec.
- current limitation sec. at 1000 mA
- prim. over-voltage protection
- grounding
- prim. fuse 315 mA at 230V
- prim. fuse 800 mA at 110V
- power consumption 35 VA max.
Protractor
We have revised our famous „Universal Protractor“. Besides making handling easier we have enhanced the functionality as well as accuracy. On this Protractor you can find all three well known, major geometries aka Baerwald, Lofgren and Stevenson.
The general geometrical correlation of a tonearm based on a fixed pivot point are well known since the fundamental publications of Baerwald and Lofgren back in the first half of the 20th century. The conclusion of both papers was that such a tracking device must have an angular offset (zenith) with a defined overhang. The offset and the overhang vary with the effective length of the tonearm itself. While tracking the record the stylus matches tangential position in the groove at two points – the inner and outer Null points (linear tracking position). In the early 1960ies another mathematician has calculated a new set of parameters taking into account that on records with classical music very often crescendos occur towards the innermost grooves (Stevenson).
Vero
If you like the sound of vinyl and want to get the most out of your turntable and pickups, then the new release will be named Vero from Dr. Feickert is the right solution for you. It has two double independent MC and MM inputs plus two line inputs. So it’s more than just a preamp for a turntable. The important thing is that you can adjust each parameter of impedance, capacitance and gain on the fly by using the remote control in very fine steps. This is the first impression of a device whose every input also remembers every set parameter, so you can compare the sound of the individual cartridges and their settings without switching, not to mention cable switching… Device availability in 2020.
- Dual mono connection
- 2x MM input
- 2x MC input
- 2x Line input
- 4 gain levels for each phono input
- Remote control
- Outputs symmetric and asymmetric
- Made in Germany
- Warranty: 2 years (electronics)
Volare
Belt-drive turntable
Quick swap mechanism for armboards
Dimensions: 420 mm x 360 mm x 125 mm
Armboard: 205 – 240 mm pivot-spindle (9 – 10 inches effective length)
Weight: 17,5 kg (w/o tonearm, aluminium platter)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Options:
- Volare (aluminium silver or black, spike feet, aluminium platter)
- Volare + (aluminium silver or black, spike feet, PO+ platter, Linear PSU)
- Volare TS (aluminium silver or black, spike feet, aluminium platter, Jelco TS-350S-DF with azimuth headshell)
- Volare TS+ (aluminium silver or black, spike feet, PO+ platter, Linear PSU, Jelco TS-350S-DF with azimuth headshell)
Woodpecker
Belt drive turntable quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment (optional)
Dimensions: 480 mm x 380 mm x 140 mm
Armboard: 205 – 300 mm pivot-spindle (9 – 12 inch eff. length)
Weight: 13,5 kg (chassis), 18 kg (without tonearm)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Blackbird
Belt drive turntable, 2 motors, 2 tonearms quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment.
Dimensions: 530 mm x 420 mm x 150 mm
Armboard right: 205 – 320 mm pivot-spindle (9 – 13 inch eff. length)
Armboard left (optional): 205 – 240 mm pivot-spindle (9 – 10 inch eff. length)
Weight: 17,5 kg (chassis), 22 kg (without tonearm)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Venti
Belt drive turntable, 3 motors, 1 tonearms quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment.
New and very stylishly looking Dr. Feickert Venti turntable. Venti that uses three motors marks the 20th anniversary of the Chris’s very first turntable creation.
Firebird
Belt drive turntable, 3 motors, 2 tonearms quick-release system for tonearms/armboards integrated Protractor for cartridge/tonearm alignment.
Dimensions: 560 mm x 460 mm x 160 mm
Right arm-slot: 205 – 345 mm pivot-spindle (9 – 14 inch eff. length)
Left arm-slot (optional): 205 – 300 mm pivot-spindle (9 – 12 inch eff. length)
Weight: 23 kg (chassis), 29 kg (without tonearm)
Warranty: 2 years (chassis and electronics), 5 years (bearing)
Linear
On our enduring research on revealing all details from vinyl records not only mechanical parameters are of importance. Even more, electrical parameters come into focus when having reached a high level of mechanical perfection…
- linear regulated, low-noise-power supply
- auto-detection of primary voltage
- 24 V / 500 mA DC sec.
- current limitation sec. at 1000 mA
- prim. over-voltage protection
- grounding
- prim. fuse 315 mA at 230V
- prim. fuse 800 mA at 110V
- power consumption 35 VA max.
Protractor
We have revised our famous „Universal Protractor“. Besides making handling easier we have enhanced the functionality as well as accuracy. On this Protractor you can find all three well known, major geometries aka Baerwald, Lofgren and Stevenson.
The general geometrical correlation of a tonearm based on a fixed pivot point are well known since the fundamental publications of Baerwald and Lofgren back in the first half of the 20th century. The conclusion of both papers was that such a tracking device must have an angular offset (zenith) with a defined overhang. The offset and the overhang vary with the effective length of the tonearm itself. While tracking the record the stylus matches tangential position in the groove at two points – the inner and outer Null points (linear tracking position). In the early 1960ies another mathematician has calculated a new set of parameters taking into account that on records with classical music very often crescendos occur towards the innermost grooves (Stevenson).
Vero
If you like the sound of vinyl and want to get the most out of your turntable and pickups, then the new release will be named Vero from Dr. Feickert is the right solution for you. It has two double independent MC and MM inputs plus two line inputs. So it’s more than just a preamp for a turntable. The important thing is that you can adjust each parameter of impedance, capacitance and gain on the fly by using the remote control in very fine steps. This is the first impression of a device whose every input also remembers every set parameter, so you can compare the sound of the individual cartridges and their settings without switching, not to mention cable switching… Device availability in 2020.
- Dual mono connection
- 2x MM input
- 2x MC input
- 2x Line input
- 4 gain levels for each phono input
- Remote control
- Outputs symmetric and asymmetric
- Made in Germany
- Warranty: 2 years (electronics)
Finishes
